| The Tenor DX Series offers: |
| ‧ |
Available with 2, 4, 6 or 8 T1/E1/PRI Spans |
| ‧ |
Up to 120 VoIP channels |
| ‧ |
Available in MultiPath or Gateway Configurations |
| ‧ |
Auto-Provisionable |
| ‧ |
Unified Communications Proxy (UCP) |
| ‧ |
Supported by Remote Management Tools* |
| ‧ |
Perfect for enterprises and service providers deploying VoIP applications |
Enterprises can benefit from a variety of valuable applications such as PBX extension, remote office connectivity, long distance consolidation and call centers. Service providers can deploy numerous VoIP applications such as SIP Trunking,Wholesale VoIP Termination, Calling Cards, Tandem Switching and Least Cost Routing. Product scales from a fractional T1/E1, with 8 simultaneous VoIP channels up to a full 8 span MultiPath Switch supporting 120 simultaneous VoIP calls.
Both versions of Tenor still include the features that made Quintum the VoIP market value leader. |
| |
|
| ‧ |
MultiPath architecture for easy integration with existing voice and data infrastructure, meaning little or no |
| |
reprogramming of the PBX, or upgrades are required and no need for special dialing plans. |
| |
|
| ‧ |
Transparent MultiPath Call Routing to intelligently route calls between the PBX, the PSTN, and the IP |
| |
network to achieve the best combination of cost and quality. The Tenor can also route calls over IP to reduce costs, and then transparently "hop off" to the PSTN, to reach off-net locations. |
| |
|
| ‧ |
PacketSaver Technology multiplexing to reduce bandwidth consumption by up to 57% by combining voice |
| |
packets from multiple calls into a single packet. |
| |
|
| ‧ |
Universal Dial Plan that provides a programmable dial plan so Tenor to be integrated into any network |
| |
environment. |
| |
|
| ‧ |
Auto Provisioning interface allows the Tenor solution to be deployed worldwide, and configured automatically |
| |
by acquiring the configuration information from a central server, upon installation. The same auto-provisioning capability allows the Tenor to be configured from a VoIP application, thus supporting a single user interface between the VoIP application and the Tenor configuration. |
| |
|
| |
|
| ‧ |
Unified Communications Proxy (UCP) provides 'Any to Any' connectivity: SIP-SIP, TDM-TDM and SIP- |
| |
TDM, for easy integration with any network. |
| |
|
| ‧ |
NATAccess to allow Tenor to operate behind NAT firewalls to translate internal IP addresses into public addresses |
| |
when a VoIP call is established with an outside party. |
| |
|
| ‧ |
Remote Management for anywhere, anytime remote management even behind NAT firewalls with Quintum's |
| |
Remote Management Session Server. |
| |
|
| Tenor and Tenor S now assure that VoIP can be deployed easily in existing voice and data networks, offering unmatched voice quality and survivability, network-wide scalability, and easy, secure remote management for installation, configuration, upgrades, troubleshooting and repair. All this adds up to lower TCO than any other VoIP solution on the market! |
| |
| |
TENOR DX SPECIFICATIONS
CALL MANAGEMENT FEATURES
‧ Automatic call type detection: Voice/Modem/Fax
‧ Answer and Disconnect Supervision
‧ Trunk group support
‧ Public and private dial plan support
‧ User programmable dial plan support
‧ Forced routing
‧ Pass-through support for calls to Toll Free, local and special service numbers (emergency services, etc.)
‧ Automatic appending and stripping of digits to dialed numbers
‧ Call Detail Records
‧ Least Cost Routing with external Quintum VoIP Call Routing Server*
TECHNICAL SPECIFICATIONS
Telephony Specifications
‧ Voice algorithms: G.723.1 and G.729ab, G.711
‧ Auto codec negotiation
‧ Fax Support:
Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps, using industry standard T.38; Super G3 compatible up to 33.6 Kbps
‧ Modem over IP
‧ Choice of 2, 4, 6, or 8 T1/E1/PRI Spans
‧ Standard RJ-45 Connectors
‧ Coding: A-law, μ-law
‧ Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G 168, up to 128 msec tailsize
‧ PRI Signaling Protocols: National ISDN-2, Euro ISDN NET5, Japan INS-NET1500, KDD, 4ESS, 5ESS, DMS100
‧ T1 CAS (E&M, Loop Start, Feature Group-D, DTMF, MF)
‧ E1 CAS (R2 MF)
‧ DASS2
‧ Tandem/TDM switching
‧ Maximum Call Rate: 7,200 calls/hour
‧ VoIP to circuit, and circuit to circuit (Tandem/TDM) switching
IP Network Specifications
‧ LAN Interface: Fast Ethernet port (10/100 Base-T)
‧ Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connections
‧ QoS Support: IP TOS, DiffServ
VoIP Network Specifications
‧ H.323 v.3 Gateway and Integrated Gatekeeper
‧ Support for multiple SIP User Agents (RFC3261 compliant endpoint)
‧ DTMF Signaling via FRC 2833 or SIP Info
‧ SIP Supplementary Services
‧ Message Waiting Indicator
‧ SIP Refer Method support
‧ IVR/RADIUS server support for AAA with integrated multilingual IVR
‧ Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG)
‧ Adaptive Jitter Buffer
‧ Packet Loss Compensation
‧ NATAccess? - NAT/Firewall
‧ Security: IP Filtering
‧ Up to 120 simultaneous VoIP calls
‧ Support for DNS-SRV
Configuration/Management
‧ Auto-Provisionable ‧ Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors
‧ Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring
‧ Remote Access with external Remote Management Session Server
‧ SNMPv2 Agent
‧ Command Line Interface
GENERAL SPECIFICATIONS
Dimensions (1U High Chassis)
W 17 3/8" x H 1 3/4" x D 10 3/4"
W 44.5cm x H 4.5cm x D 27.6cm
‧ Maximum weight: 8.25 lbs (3.75kg)
‧ AC Power: 100-240 Volts AC, 50/60 Hz, 50 watts
‧ Operating temperature: 40° - 104° F (5° - 40° C)
‧ Operating humidity: 20% - 80% non-condensing
‧ Telco: FCC Part 68, TS-016, TBR4, TS-038, CS03
‧ EMC: FCC Part 15, EN55022, EN55024, EN61000-2-3, EN61000-3-3
‧ Safety: UL60950, EN60950, AS/NZS60950 |
